​You can learn about imported CNC lathe machining parts

​You can learn about imported CNC lathe machining parts

Imported CNC lathes are often used to process parts, and the products processed are also commonly used in daily life. Nowadays, there are many manufacturers of processed parts, and many parts are beginning to use CNC machining, so why this Is the processing meeting so welcome? How to operate correctly to ensure quality problems during processing? Take a look!

Imported CNC lathe processing parts operation

Before mechanical work, check whether the moving part is filled with lubricating oil, then start and check whether the clutch and brake are normal, and run the machine idling for 1-3 minutes. It is strictly prohibited to operate when the machine is faulty.

It is necessary to wait for all other personnel to leave the working area of ​​the machine and remove the debris on the workbench before turning on the power supply to start the machine.
Imported CNC lathe machining
Maintain the correct posture at work and have sufficient energy to cope with the work. If you find that you are unwell, you must leave the job immediately and report it to the leader. When operating, you must concentrate your thoughts, strictly forbid chatting, and cooperate with each other. The operator must not operate in a state of irritability and fatigue, so as to avoid accidents and ensure safe operation. Before entering the work position, all employees check whether their clothing meets the job requirements. Slippers, high heels and clothing that affect safety are not allowed, and those with long hair must wear a helmet.

When the imported CNC lathe machining machinery is working, it is forbidden to reach into the working area of ​​the slider, and it is strictly forbidden to pick and place the workpiece by hand. Use standard tools when picking and placing workpieces in the die. If you find any abnormal sound or malfunction of the machine, you should immediately turn off the power switch for inspection. After the machine is started, one person transports materials and operates the machine. Others are not allowed to press the electric building or step on the foot switch board, let alone put their hands in the working area of ​​the machine or touch the moving parts of the machine with their hands.

When changing the mold, turn off the power first, and then start the installation and debugging of the mold after the press movement department stops running. After installation and adjustment, move the flywheel by hand for two test punches to check whether the upper and lower molds are symmetrical and reasonable, whether the screws are firm, https://tungusten.com/and whether the blank holder is in a reasonable position.

When leaving get off work, turn off the power supply, and arrange the finished products, side materials and sundries on the job to ensure a clean and safe working environment.