What Are The Uses Of Medical Silicone Oil?

Medical silicone oil is colorless and clear oily liquid; odorless or almost odorless, tasteless. Medical silicone oil is easily dissolved in chloroform, ether or toluene, but insoluble in water and ethanol. What are the uses of Wenzhou medical silicone oil?

Medical silicone oil is a kind of polyorganosiloxane with chain structure with different degree of polymerization. It is prepared by hydrolysis of dimethyldichlorosilane with water to obtain the primary polycondensated ring. The ring is cracked and rectified to obtain low ring. Then the ring body, capping agent and catalyst are put together to adjust and polymerize to obtain various mixtures with different polymerization degrees. The low boiling matter can be removed by vacuum distillation to obtain silicone oil.

Application: there are various viscosities. It has high heat resistance, water resistance, electrical insulation and small surface tension. Commonly used as high-grade lubricating oil, shockproof oil, insulating oil, defoamer, release agent, polishing agent and vacuum diffusion pump oil. Methyl silicone oil is more commonly used. In addition, there are ethyl silicone oil, methylphenyl silicone oil and nitrile containing silicone oil.

Medical silicone oil is a kind of polyorganosiloxane liquid and its derivatives, which are used to diagnose, prevent and treat diseases or play the role of lubrication and defoaming on medical devices. Broadly speaking, silicone oil used for skin care and beauty care also belongs to this category. The commonly used medical silicone oil is polydimethylsiloxane. By its defoaming property, it can be made into a swelling tablet for abdominal distension and an aerosol for treating pulmonary edema. It can also be used as an anti adhesion agent to prevent intestinal adhesion in abdominal surgery, as an antifoaming agent for gastric juice and a lubricant for some medical surgical instruments in gastroscopy.

Link to this article:What Are The Uses Of Medical Silicone Oil?

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.:Silicone And Casting,Thanks

Silicone Travel Bottle Set For Personal Care|Cosmetic Storage

When you want to travel you may feel irritated with your baggage, especially with the shampoo and cosmetic water you want to take.But don't be worry, here is some travel bottle set that can increase the space in your luggage. The silicone travel bottle set is made of soft silicone material. Well-made, leak-proof bottles used to carry liquids, gels, and aerosols such as shampoo, skincare cream, hand sanitizer gel, etc.

                                                    
You have three sizes to choose from our silicone travel bottle,38ml、60ml、80ml. You can use different sizes for your need. You can easily put them in your wallet, backpack, shoulder bag, or inside the wheeled suitcase. Choose a suit that can hold travel essentials so you can carry everything you need with you when you travel or go out. 

Link to this article:Silicone Travel Bottle Set For Personal Care|Cosmetic Storage

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.:Silicone And Casting,Thanks

manufacturer of plastic,making molding

PIM Plastic mold company is a qualified manufacturer of plastic. With over 14 years’ knowledge of producing and exporting different kinds of china plastic injection molding, we have extremely distinctive and skilled know-how particularly in plastic molding and logo producing.

We offer the entire set of state-of-the-art machines and strong capability in mould designing and brand new products building which guarantee us to create the accurate custom-made products based on your unique demand. We have a great number of sizes and designs accessible to fulfill various needs.

We are positioned in Taizhou, close to Ningbo Port and Shanghai Port which allow us to make contact with consumers globally. Top quality, fast shipping and liable support help make us a dependable companion with consumers in European countries, The united states and other areas and locations.
We constantly make an effort to offer the very best plastic goods at the best price achievable within the soonest time. Using our specialist help, we just help make your promotional campaign a worry-free experience!

August 17, 2020 plastic mold

Link to this article:manufacturer of plastic,making molding

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.:Silicone And Casting,Thanks

Viscosity and corresponding molecular weight of dimethyl silicone oil

Viscosity of dimethyl silicone oil (CS) molecular weight approximate viscosity liquid

5.800 water

20.2000 edible oil

50 3800

100.6000 paint

200 9400 Shampoo

350 13700 mineral oil

500 17300 ketchup

1000 28000 engine oil

5000 49300

10000 62700 syrup

12500 67700

30000 91700 honey

60000 116500

100000 139000

300000 204000

600000 260000 miChinashakes

4000000 400000 jelley

20000000 550000

Link to this article:Viscosity and corresponding molecular weight of dimethyl silicone oil

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.:Silicone And Casting,Thanks

Hot Sale Flexible Face Pad Silicone Face Brush

Beauty personal care, always is important. Nobody can win the race against time. However, we can keep our skin in a good situation through daily cleaning. Face brush, become more and more popular among young girls due to its features of convenience and health.Now, we have a new product–silicone face wash brush in sale. Here are some details about it.The product parameter informationof this silicone face clean brush is that:Size: 14.5 * 9 * 2.5 cmWeight: 100gMaterial: 100% food grade silicone Features: Soft, Flexible, Heat resisting, Health, SafeOur company is a experiened silicone products supplier, offered OEM and ODM service. If you have special requirments, such as different colors, different size or adding Logo, we will gladly accept them.Thank you for your reading. And look forward to cooperate with you.

Link to this article:Hot Sale Flexible Face Pad Silicone Face Brush

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.:Silicone And Casting,Thanks

What is the difference between the silicone tube and rubber hose?

With smell, silicone is tasteless, rubber has a flavor, silicone generally better flexibility, rubber machinery is better.
 Silicone tube has high resistance to low temperature (60 ℃ ~ 200 ℃), environmental non-toxic, excellent heat oxygen aging, ozone aging resistance, aging resistance to light and weather aging resistance, soft, arc resistance, corona resistance. Biggest characteristics of the silicone tube is resistant to temperature change – 60 to 250 degrees, but the cost is very expensive, for hose requirements. Compressive strength silicone tube pressure can also.
 Silicone tube is 100% completely non-toxic, tasteless, fine wire silicone, silicone tube (article), high pressure resistant silicone tube, the gear shape silicone tube, sealing strip, profiled bars, food-grade silicone tube (article), medical (non-toxic) silicone tube, medical silicone tube, weaving the silicone tube (used for conveying have work pressure, liquid food, pharmaceuticals and biological products.) , medical silica gel pipe joint, silicone sealing tube, flame-retardant tube (article), silicone foam tube (article), high temperature resistant silicone tube; Performance: the cold resistance Resistance to high temperature. Harmless non-toxic tasteless; Suitable for: small appliances (coffee pot, KaiShuiHu, iron, electric rice cooker, deep fryer, disinfection cabinet, water dispensers, fruit pulp machine, bread machine, burner, water heater, etc.) and electronic, automotive, medical and other mechanical products.
Rubber main performance: the rubber hose is non-toxic, environmental protection, physical inertia, resistance to ultraviolet radiation, ozone resistance, high and low temperature (80 to 300 degrees c), high transparency, resilience is strong, resistant to compression deformation, oil resistant, resistant to stamping, acid and alkali resistance, abrasion resistance, flame retardant, resistance to voltage, conductive performance.

For more information visit the related
  • Why doesn’t silicone melt or burn?
  • Do you put silicone bakeware directly on the oven rack?
  • What is the melting point of silicone rubber?
  • Link to this article:What is the difference between the silicone tube and rubber hose?

    Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.:Silicone And Casting,Thanks

    Polydimethylsiloxane

    Polydimethylsiloxane, also known as dimethylsiloxane, is a hydrophobic silicone material. It has been used in medicine, daily chemical products, food, construction and other fields. It has hundreds of derivatives. The commonly used polysiloxanes are mainly: polydimethylsiloxane, cyclomethylsiloxane, amino siloxane, Polymethylphenyl siloxane, polyether polysiloxane copolymer. Among them, cyclopolydimethylsiloxane is a kind of commonly used polysiloxane.

    You usually see the name of poly two methylsiloxane (Polydimethylsiloxane) in cosmetics, shampoos, shower gel, lip balm, sunscreen oil and most cosmetic skin care products, even in American mallard, in lotion or cream. Also known as dimethyl silicone oil, this is a hydrophilic silicone material, it has many derivatives, is used in medicine, daily chemical products, food and other aspects.

    Dimethylsilicone oil, colorless or light yellow liquid, tasteless, high transparency, no irritation to skin and mucous membrane, but irritation to eyes. It has good chemical stability and physiological inertia. It and its derivatives are both high-quality raw materials of cosmetics and have good skin care functions. They belong to synthetic oils in cosmetics raw materials.

    Moisture retention of polydimethylsiloxane

    Polysiloxane is the general name of this kind of material, also known as silicone or silicone oil, are this kind of material. In cosmetics, it has the function of lubrication, anti ultraviolet, good air permeability and obvious dust-proof function. It is also used to replace traditional grease raw materials in cosmetics. This is based on the good softness of polydimethylsiloxane. Skin care products are usually used in moisturizing products, and some high-grade skin care products will also be applied.

    Permeability of polydimethylsiloxane

    Polydimethylsiloxane has a very good permeability to the skin. The smooth and refreshing feeling of skin care products applied on the skin is usually due to the addition of the raw material. The raw material itself has a good effect on increasing the softness of the skin. In hair care and shampoo products, it can deepen the color of the hair and help the hair maintain its natural luster. Basically, the raw material can be found in the shampoo that can make the hair smooth.

    Therefore, this ingredient is widely used in skin care and hair care products, mainly in the public category. As for the long-term use of silicon, it's not necessary to say more about sir. It's important to look at the ingredients when buying products!

    Link to this article:Polydimethylsiloxane

    Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.:Silicone And Casting,Thanks

    Can I Make Chocolate In A Silicone Chocolate Mold?

    Can I make chocolate in silicone mold?Silicone chocolate mold is features in reusable, soft, pliable, flexible & durable, anti stick. It can  work well for chocolate DIY.As a silicone products manufacturer, Weishun manufacture silicone molds designed for making chocolate and sell them to home and abroad.We have several 100% silicone chocolate mold tray in funny shapes.1.Silicone Mold Plants vs. Zombies ThemeSize: 21.5*11.2*1.4cmWeight: 77 g100% silica gelA silicone material mold with 10 different shapes cavity can be used to make chocolate, hard candy or baked biscuit.
    2.Silicone chocolate tray in fruit shapesSize:22.5 * 11 * 2 cmWeight:75 gAvailable color: Customized color3.Sea Animal Silicone Mold(8 holes)
    This mold have 8 sea animal shape cavities.  You can use it to DIY funny animal shape chocolate or mini cakes.We select raw material supplier who can provide FDA, LFGB, CE certifications of silicone. And silicone molds produced by Weishun are made of fodd grade silicone rubber(FDA standard silicone). FDA silicone chocolate mold doesn't contains BPA and has a smooth flawless surface. In addition, silicone is regard as an inert material will not release toxic substance in low temperrature as well as high temperature. So it is safe to put silicone chocolate mold filled with melted chocolate in the refrigerator.If you need silicone molds which can pass LFGB or FDA test. Maybe Weishun can help you.

    Link to this article:Can I Make Chocolate In A Silicone Chocolate Mold?

    Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.:Silicone And Casting,Thanks

    Kickstart: Starting up soon n Texas

    A Texas TV station got a tour of the Gulf Coast Growth Ventures petrochemicals plant in San Patricio County, Texas, which could come on line by the end of this year.”We’re in the process of starting up our utilities,” .The $7 billion plant, a joint venture of Sabic and ExxonMobil, will include two production units for polyethylene resins, as well as a unit making monoethylene glycol feedstock and a massive ethane cracker with almost 4 billion pounds of annual capacity.The companies firstproject in 2018. When completed, it is expected to employ 600. About 4,500 construction workers are working at the site near Corpus Christi now to convert it from a cotton plantation to a cracker.Fritsch said he expects the plant to begin starting up by the end of this year, which will be right on target with the original estimate that it would open in 2021 or 2022. Add fishing and art projects to the list of items Americans invested in during the pandemic. The two activities have helped fuel sales for Wisconsin injection molder Flambeau Inc.As Plastics News correspondent Jeannie Reall writes, to three of its nine manufacturing sites in the U.S. to increase production capacity.”The new machines will be used to make … stock boxes and cases for Flambeau Outdoors, ArtBin and other packaging lines; and proprietary products including Brute toolboxes, gun cases and tackle boxes,” Jeannie reports. When the Society of Plastics Engineers thermoforming division meets again — in person — in Grand Rapids, Mich., Sept. 20-24, it will also resume its parts competition.As you all know, it’s hard to judge parts when you can’t get your hands on them, so the biennial competition comes along at just the right time for judges to study the items up close.This year, in addition to usual categories — roll-fed industrial, medical or food; heavy-gauge vacuum formed, pressure formed, twin sheet and thermoplastic polyolefin; parts made with recycled or sustainable materials; and parts made using automation and new technology — is a new category for production parts made using 3D printed tooling.”While 3D printing was initially considered a competitor to thermoforming by some, the advantages of this technology offer new applications in our field,” said Travis Kieffer, parts competition chair for the conference. “We are seeking part entries that decrease lead times for prototypes and low run production of parts, and streamline the end product’s development time.” Do you have an opinion about this story? Do you have some thoughts you’d like to share with our readers? Plastics News would love to hear from you. Email your letter to Editor at Staying current is easy with Plastics News delivered straight to your inbox, free of charge. Subscribe to Plastics News Plastics News covers the business of the global plastics industry. We report news, gather data and deliver timely information that provides our readers with a competitive advantage.Customer Service:

    Link to this article:Kickstart: Starting up soon n Texas

    Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.:Silicone And Casting,Thanks

    Usage For Silicone Sponge Holder For Kitchen Sink

    Usage for silicone Sponge Holder for Kitchen Sink

    This silicone sponge holder for kitchen sink is made of high quality silicone materials that are eco-friendly, durable, flexible and easy to cleaning, good organizer for kitchen sink small items like sponge, duster cloth.

    Our silicone sponge holder for kitchen sink stands out in the market because it has drain holes on the bottom, never dirty water could accumulate inside the caddy.

    Keep your cleaning sponges organized with our silicone sponge holder for kitchen sink. This space-saving hanging sponge holder fits standard dish sponges with adjustable neck strap for easy hanging and installation on any size of sink faucet.

    Kitchen silicone sponge holder for kitchen sink holds sponge, scrubber, scouring pad, drain stopper, and more. Great for kitchen, workplace, bathroom, craft room, classroom, or office sinks

    Link to this article:Usage For Silicone Sponge Holder For Kitchen Sink

    Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.:Silicone And Casting,Thanks