Preventive maintenance of CNC machining CNC machine tools in Dongguan

Preventive maintenance of CNC machining CNC machine tools in Dongguan

Dongguan CNC processing manufacturers have their own set of equipment maintenance programs. In many cases, they hire special personnel for maintenance. The conditions for the survival of the company must be protected.
The key to preventive maintenance of CNC machine tools in Dongguan is to strengthen daily maintenance. The main maintenance tasks include daily inspection, weekly inspection, monthly inspection, quarterly inspection, and semi-annual inspection. The preventive maintenance of Dongguan CNC machining CNC machine tools is as follows:

1. Daily inspection
The content of the daily inspection is mainly the daily maintenance of various systems, such as: hydraulic system, spindle lubrication system, guide rail lubrication system, cooling system, air pressure system. In fact, it is not very complicated, you can understand it as the normal condition of each system to be tested.
Dongguan CNC machining
2. Weekly inspection
Including machine tool parts and spindle lubrication system, they should be checked correctly every week, especially for machine tool parts to remove iron filings and clean up external debris.

3. Monthly inspection
Check the power supply and the air dryer every month. The power supply voltage is rated at 180V-220V under normal conditions, and the frequency is 50Hz. If there is any abnormality, it must be measured and adjusted. The air dryer should be disassembled once a month, and then cleaned and assembled.

4. Seasonal inspection
The quarterly inspections of Dongguan CNC machining manufacturers should mainly check the machine bed, hydraulic system, and spindle lubrication system.

5. Semi-annual inspection
After half a year, the hydraulic system, spindle lubrication system and X-axis of the machine tool should be checked. If something goes wrong, the oil should be replaced and then cleaned.

After Dongguan CNC processing manufacturers are fully familiar with and master the knowledge of preventive maintenance, they must also have a deeper understanding and necessary mastery of the causes and treatment of abnormalities in the hydraulic system. In order to find a solution in time when the fault occurs.